Upgrade your disc brake factory manual transmission 64-66 Mustang to power brakes and a dual bowl master cylinder! With a factory look this 7-inch power brake booster kit is designed to work with no modifications to your factory strut tower and export brace (notching of the thin OE brace may be required if you haven't already updated to an export brace). In this power brake booster kit you receive a 7" booster, mounting brackets, installation hardware, dual bowl master cylinder, brake pushrod, adjustable proportioning valve, the brake lines necessary to route from the new master cylinder to your factory 3 port distribution block and step-by-step installation instructions. The adjustable proportioning valve included in this kit allows you to fine tune the amount of pressure your rear brakes receive in order to prevent rear wheel lockup. A great brake power brake kit with a factory look and great performance!
Note:

This 7-inch power brake booster kit will only fit vehicles with factory manual transmission "Z Bar" linkage.

For manual shift cars equipped with aftermarket cable style clutch use any of our Auto Trans versions.

7" boosters will require a minimum of 18 inches of vacuum for effective use.

 

  • 1964 - 1966 Mustang
SKU FC0042HK
Brand Leed Brakes
Shipping Weight 12.0000kg
Shipping Width 0.040m
Shipping Height 0.250m
Shipping Length 0.030m
Shipping Cubic 0.030000000m3

Be The First To Review This Product!

Help other Custom Mustangs users shop smarter by writing reviews for products you have purchased.

Write a product review